There are many .ini options that could be used for the Entry Window.

Sending Exchange/QRZ mode at start up [Entry]

SmartEnterKey=0

Rotator Port and Type [Entry]

RotatorPort=1  You can use COMM1 through COMM8

RotatorType=1 DCU-1, Yaesu, etc.

Adding call to Band Map on Space [Entry]

Non-zero causes the current CALL to be added to bandmap if you SPACE out of the CALL field.

MapCallOnSpace=0

Sending calls to both the Band Map and the Packet window [Entry]

Non-zero causes WriteLog to send dupe checked calls that are to be sent to the band map, to also be sent to the Packet Window.

LocalDupeChecksToPacket=1 (this will cause the band map entries to be sent to Packet)

Free Form character width [Entry]

When running Enter Window in Free Form, the width of the entry field is controlled by this setting in number of characters.

FreeFormCharWidth=11

Entry Window colors [Entry]

Colors to use on screen. bb is blue, gg is green, rr is red

OKMsgColor=0×00bbggrr
NotOKMsgColor=0×00bbggrr
UnselectedBackgroundColor=0×00bbggrr
XmitInProgressColor=0×00bbggrr
LockedSerialNumberColor=0×00bbggrr
SaveWarningColor=0×00bbggrr
EntryLRText=0×00bbggrr
XmitEnableOKColor=0×00bbggrr
XmitEnableNotOKColor=0×00bbggrr
CallQueueOutlineColor=0×00bbggrr
CallQueueBkColor=0×00bbggrr

Auto fill and clear of Call Field in Entry Window while tuning [Entry]

You can tell WriteLog that you are tuning and want calls from the Band Map to auto-fill and clear the Call field in the Entry Window.  Use these four entries to accomplish this:

One: Distance radio must tune in order to say its is tuning the band. Set this to zero and WriteLog will not clear the Entry window when the radio is tuned.

AutoClearOnTuneMinHz=200

Two: If you tune closer than AutoFillFromBandmapHz to a bandmap station, the Entry window will be auto-filled from his frequency. Set this to zero and WriteLog will not auto fill. AutoClearOnTuneMinHz set to zero will disable AutoFillFromBandmap as well.

AutoFillFromBandmapHz=400

Three: With AutoSetToSplitFromBandMap set nonzero, WriteLog will set the rig to the split frequency in the bandmap as you tune across it. AutoFillFromBandmapHz must be non-zero for this to function.

AutoSetToSplitFromBandMap=0

Four: TuningDetectionCount is the number of consecutive polls of the rig that must be tuning to decide the operator really is tuning.

TuningDetectionCount=3